
Avery Dennison · RFID tag
Avery Dennison RFID Returnable Transport Item (RTI) Label with AD Dogbone™ M830 Inlay
Long-lasting printable labels with advanced RFID AD Dogbone™ M830 Inlay to track and trace plastic RTIs
Datasheet at Zebra Product page at Zebra
Raptool apps in the Raptool Client read and write this tag on a UHF RFID handheld, sled or fixed reader, online and offline. RFID solutions
Overview
Avery Dennison RFID Returnable Transport Item (RTI) Label with AD Dogbone™ M830 Inlay is a passive UHF RFID inlay for labels. Read range: Up to 22m (frequency and substrate dependent).
Specifications
Tag
- Tag type
- Inlay / label
- Memory
- EPC 128 bit; User N/A; TID 96 bit factory locked (48 bit unique)
- Frequency
- ETSI (865-868 MHz); FCC (902-928 MHz)
- Protocol
- EPC Gen2v2
- Size
- 97x27mm
- Surfaces
- Reusable/returnable plastic containers (RTIs); Air, Cardboard, Fiberglass, Glass, PTFE, Polyacetyl, PVC, Rubber (theoretical read range table); adhesive strength tested on polypropylene and high-density polyethylene
- Attachment
- Permanent acrylic adhesive 0.8mil (20 microns)
- Face material
- Topcoated polyester – 1.7mil (43 microns)
- Zebra part number
- Label RM# 10040773RM
Label
- Label Product Name
- RFID Returnable Transport Item (RTI) Label
- Label RM Number
- 10040773RM
- Facestock
- Topcoated polyester – 1.7mil (43 microns)
- Adhesive
- Permanent acrylic adhesive 0.8mil (20 microns)
- Liner
- Paper – 2.4 mil (61 microns)
- Total Thickness (+/-10%)
- 4.9mil (124 microns)
- Environment
- Indoor/Outdoor use
- Minimum application temperature
- 0°F / -18°C
- Service temperature range
- -30°F to 185°F / -34°C to 85°C
- Printers
- Thermal transfer printer (ribbon required); use Zebra desktop, mid-range and high-performance thermal printers for optimal performance
- Ribbons
- Compatible with resin ribbons; use Zebra 5095 ribbon for optimal performance.
- Adhesive strength, Polypropylene
- 5 minute dwell time: 20 oz/in (6 N/25mm); 24 hour dwell time: 48 oz/in (13 N/25mm)
- Adhesive strength, High-density Polyethylene
- 5 minute dwell time: 23 oz/in (6 N/25mm); 24 hour dwell time: 23 oz/in (6 N/25mm)
- Chemical resistance: Blood
- 5095 Recommended
- Chemical resistance: Body Fluid
- 5095 Recommended
- Chemical resistance: Salt Water
- 5095 Recommended
- Chemical resistance: Water
- 5095 Recommended
- Chemical resistance: Window Cleaner
- 5095 Recommended
- Chemical resistance: Alcohol
- 5095 Recommended
- Chemical resistance: Ammonia
- 5095 Recommended
- Chemical resistance: Bleach
- 5095 Recommended
- Chemical resistance: IPA
- 5095 Recommended
- Chemical resistance: Gasoline
- Test in your application
- Chemical resistance: Grease
- 5095 Recommended
- Chemical resistance: Acetone
- Not recommended
- Chemical resistance: IR Reflow
- Not recommended
- Chemical resistance: MEK
- Not recommended
- Chemical resistance: TCE
- Not recommended
- Chemical resistance: Xylene
- Not recommended
- Recommended Storage Conditions
- 68°F to 77°F / 20°C to 25°C at 40 to 50% RH
- Expected Lifespan in Application
- Exterior use – 3+ years
- Regulatory and Compliance
- Meets FDA 175.105 for indirect food requirements
RFID Technical Information (AD Dogbone™ M830 Inlay)
- Chip
- Impinj M830 with Gen2X features
- EPC Memory
- 128 bit
- User Memory
- N/A
- TID
- 96 bit factory locked (48 bit unique)
- Read Sensitivity
- -25.5dBm
- Write Sensitivity
- -20dBm
- RFID Standards
- EPC Gen2v2
- Read Range
- Up to 22m (frequency and substrate dependent)
- Inlay Size
- 97x27mm
Theoretical read ranges
- Read range on Air (ETSI / FCC)
- 19m / 21m
- Read range on Cardboard (ETSI / FCC)
- 20m / 19m
- Read range on Fiberglass (ETSI / FCC)
- 19m / 17m
- Read range on Glass (ETSI / FCC)
- 17m / 19m
- Read range on PTFE (ETSI / FCC)
- 22m / 22m
- Read range on Polyacetyl (ETSI / FCC)
- 20m / 18m
- Read range on PVC (ETSI / FCC)
- 21m / 19m
- Read range on Rubber (ETSI / FCC)
- 17m / 19m
Product Performance and Sustainability
- Operating Temperature
- -40°C / +85°C (-40°F / +185°F)
- Storage Temperature
- 68°F to 77°F / 20°C to 25°C at 40 to 50% RH
Testing and Compliance
- Zebra pre-testing
- All inlays certified by Zebra have been pre-tested with Zebra printers and readers.
- Warranty
- Supplies are warranted against defects in workmanship and materials for a period of 1 (one) year from the date of shipment.
Markets and Applications
- Healthcare
- Asset tracking, reusable plastic containers
- Transport and Logistics
- Asset tracking, reusable plastic containers
- Manufacturing
- Asset tracking, reusable plastic containers
- Warehousing
- Asset tracking, reusable plastic containers
- Retail
- Asset tracking, reusable plastic containers
Surfaces: Reusable/returnable plastic containers (RTIs); Air, Cardboard, Fiberglass, Glass, PTFE, Polyacetyl, PVC, Rubber (theoretical read range table); adhesive strength tested on polypropylene and high-density polyethylene
Lifecycle
- Sales status
- Current
- Status basis
- Listed on Zebra RFID Labels and Tags page; no lifecycle statement found.
Send a request
Get a quote for the RFID Returnable Transport Item (RTI) Label with AD Dogbone™ M830 Inlay
Tell us where you are and what you need.


